Questions for cisco ccnp cbt

cisco ccnp cbt in the news

Keep Conference in CME

Sun, 16 Jul 2006 23:05:53 +0000
By default if conference initiator hangs up the call, the conference is terminated.
To keep the conference parties connected when the conference initator leaves, configure under the  ephone “keep-conference“. When the initiator hangsup the remaining parties stay connected. If he uses the end-call soft key, the conference is terminated.
To keep the conference parties connected when the ...]

Disable resume from MGCP shared line FXS port

Thu, 20 Jul 2006 00:51:44 +0000
This parameter determines if you can resume a call from hold on a MGCP FXS shared line.
Default value is true

IOS error(?) with OSPF point-to-multipoint network in PPPoFR Hub-and-Spoke Topology

Sun, 21 Sep 2008 15:49:40 +0000
How nerdy is that for a blog post title?  
I’ve run up against this issue twice now.  The issue seems to be an order-of-operations issue in IOS with PPPoFR in a hub-and-spoke network running OSPF network type point-to-multipoint.  This is most likely something that you’ll (hopefully) never see in a real network.  If you ...]

IP Expert BLS and IE Mock Lab 5

Mon, 01 Sep 2008 06:06:34 +0000
Over the weekend I got access to the IP Expert workbooks volume I, II and III, which are part of the

MPLS - The basics explained and demonstrated

Fri, 29 Aug 2008 04:36:05 +0000
I mentioned in an earlier post that I was attempting to conquer MPLS via a book called “MPLS-Enabled Applications”.  This was a pretty big mistake.  By the 10th page I realized that this book is not at all for MPLS noobs.  At that point I stopped wasting my time and started plunking away at IE’s ...]

How to debug DTMF relay?

Tue, 22 Aug 2006 00:56:01 +0000
For H323
debug h245 asn1
For SIP
debug voip rtp session named-event
Sample output
H323
Aug 21 21:07:37.902: h245_decode_one_pdu: more_pdus = 0, bytesLeftToDecode = 7
Aug 21 21:07:37.902: H245 MSC INCOMING ENCODE BUFFER::= 6D810447200063
Aug 21 21:07:37.902:
Aug 21 21:07:37.902: H245 MSC INCOMING PDU ::=
value MultimediaSystemControlMessage ::= indication : userInput : signal :
{
signalType “9″
duration 100
}
SIP
Aug 21 21:07:37.902:          Pt:101    Evt:9       Pkt:04 00 00  <Snd>>>
Aug 21 ...]

There is significant matter enclosed in this article about cisco ccnp cbt for you to understand cisco ccnp cbt better. Use it to it's best.


Featured cisco ccnp cbt Items



Discount PCs, HDTVs and More at the new CompUSA.com


ccie lab tips
ccie lab topology
ccie lab training
network simulator | networking | new cisco ccnp | pass ccie lab